Hi,

Not sure if anyone can suggest anything to help but here goes:
I found this modem lying around with an old, now expired vodafone SIM. After some googling I thought I should be able to unlock it and enable voice.
Unlock worked fine and I've had it going on a cpl of laptops. I updated the firmware to the latest version (11.609.10.00.00.B716) and all was working OK.
I then tried to enable voice with the AT command AT^CVOICE=0. I then also issued another cpl of commands (because I copied and pasted the wrong one and also because I didn't know what I was doing) which were AT^U2DIAG=255 and AT^U2DIAG=267

Anyway, following a reboot the result is it's no longer detected as a modem. (Same in 2 other PCs) and hence I can't do anything including issuing other AT commands that may reverse it (because there's no device to point them at).

I appreciate it serves me right but I wondered if there's anything I can attempt before I throw it out?

Cheers for any help

Steve

7  out of 8 found this valuable. Do you find this valuable? Do you?    

anybody know where i can find windows ce drivers for this modem

28  out of 29 found this valuable. Do you find this valuable? Do you?    

Show Last Reply

Sorry for refreshing this old issue, but I can't manage to update via the FMC Update tool still after reading all the other threads about it:
I have: tried several FMC tool versions, set my PCs IP to DHCP or something in the 192.168.1-range and reset the router to the 192.168.1.1, but still get the message "Detect none router": pushing the "Check"-button for minutes...
Any ideas?
With another D100 I could manage to use the built-in web frontend for upgrade, but this other box says "Parse error" and something about wrong file name (most probably this router only accepts o2-branded firmware via the web GUI).
In case someone can tell me what I do wrong with the FMC Update tool, please help :-)

8  out of 12 found this valuable. Do you find this valuable? Do you?    

Show Last Reply

http://www.youtube.com/watch?v=mi_BOo6uGjk
youtube rewiew

10  out of 13 found this valuable. Do you find this valuable? Do you?    

Show Last Reply

Hi, I have a Huawei E160E which worked fine in windows, but not with my Android 2.2 tablet, so I upgraded the firmware to
E160Update_11.609.10.02.432.B418.exe, hoping that might solve my problem.
Unfortunately, it is now not recognised as a modem in 'device manager', but just as a
Mass Storage Device, and in Explorer it is listed as 'CD Drive (F:) Mobile Partner'
Now I can't connect at all, nor send any AT commands, as it is not listed as a modem.
Can anybody help? or, if this has been answered before, point me to the link?
Thank you

12  out of 13 found this valuable. Do you find this valuable? Do you?    

i have alcatel X090S modem and i need to know how i can unlock the network code
please help me

6  out of 7 found this valuable. Do you find this valuable? Do you?    

Another rebranded version: T-Mobile.de - Telekom Speedstick LTE -
http://www.t-mobile.de/shop/handy/0,4855,2963-_183595-0-1-4,00.html

3  out of 3 found this valuable. Do you find this valuable? Do you?    

Hi all,

Newbie here and hope you guys wil help me out. I have searched for days, bt didnt find satisfying answr. Herez da prob guys,

Recently I bought a huawei umg-1831 usb modem which was locked to T-Mobile and now unlocked.
Its runing on t-mobile web connect manager 2.05(current for this model in t mobile) and t mobile firmware.
Then I thought bout flashing it with latest huawei mobile partner ver.21(which i found to be new and it is said that voice enabled) and with t-mobile firmware or firmware from dc-files.

Then i came to doubt that, can i flash just huawei mobile partner while using t-mobile firmware or if i shuld flash firmware with generic huawei firmware too?
And would flashing either of these updates wil again locked down my modem? (I mean that flashing huawei firmware, mobile partner or even updating t mobile firmware)
Thanks all.

9  out of 9 found this valuable. Do you find this valuable? Do you?    

I figured that I do NOT need to mobile parter software at all.

It suffices to send the following at commands to the usb device:

AT+CPIN=1234
AT+cgdcont=1,"IP","apn.name"

Afterwards I can connect to that network using regular windows networking calling number *99#.

Now all would be fine, if I could add these AT commands to the modem initialization on the advanced tab of the modems properties. However that input field is disabled...

Is there any way to do this?

Regards,
Steffen

18  out of 22 found this valuable. Do you find this valuable? Do you?    

Show Last Reply

Hi All, I had purchased a Huawei e173 modem for a project purpose. I want to use it as a 3g USB modem now. Can anyone tell me the steps to do it?
I have previously tried using it with IDEA sim, Airtel sim. Windows OS detects it but I dont know how to set it up and use the connection.
I am using ubuntu os.

12  out of 14 found this valuable. Do you find this valuable? Do you?